Great Sites - Australia

Login:
  • Login:

Earn more entries and get great deals

Shop & WIN : 1 entry per $10 spent on online shopping

CB Radios

  • GME Wired Remote to suit GD9600 Series Image
    The Boat Warehouse
    in Australia
    $88.11
    $15.00 P&P
    $103.11 Total Price
  • Mobile One Black 477Mhz 6.5Db Gain Uhf Image
    477MHz Ground Independent 6.5dB Gain UHF CB Antenna With Spring Base Features: Same as the RF470SS but powder coated black All Stainless Steel & Brass (will not corrode) Full 6.5dB Gain Low SWR (no tuning required) Computer Designded & Manufactured 3.6m Cable Length Made In Australia Specifications: Type: Ground Independent Colinear Length: 890mm Weight: 472g Tuning: Factory Preset Frequency: 477MHz Impedance: 50 Ohms Max Power: 300 Watts Termination: PL259 Supplied Pattern: Omni Directional Application: Mobile or Base Vswr: <1.5 to 1 over 18MHz Gain: 6.5dB   5 Years Warranty
    Dick Smith
    in Australia
    $110.00
    $0.00 P&P
    $110.00 Total Price
  • Chemtools 15Ml No Clean Solder Flux Image
    No Clean Liquid Flux – 15ML BRUSH BOTTLE NC 264-5 is a resin-free, halide-free, wave solder flux designed to enhance wetting and prevent bridging during the wave soldering process. NC 264-5 offers an enhanced activity level, as well as lower surface tension than other flux chemistries. NC 264-5 performs well with bare copper,solder coated and organic coated PWBs. This material leaves negligible post-process residues that are non-conductive and do not require post-process cleaning for most assemblies. FEATURES: Resin and Halide Free Very Good Wetting Reduces Bridging Wide Process Window SPECIFICATIONS: Physical Properties: SOLIDS CONTENT: 3.5% FLUX DENSITY: .80 ± .01 ACID NUMBER: 19.4MG KOH/GRAM ± .5 Handling: NC 264-5 has an unopened shelf life of 1 year when stored at room temperature. Do not store near fire or flame. Keep away from sunlight as it may degrade product. NC 264-5 is shipped ready-to-use. No mixing is necessary. Do not mix used and unused chemical in the same container. Reseal any opened containers. Flux Application: NC 264-5 is formulated for application via spray, foam, brush, mist, or dip. For Spraying, NC 264-5 is ready to use directly from its container, no thinning required. When spray fluxing, it isimperative that proper flux coverage and uniformity be achieved and maintained. A dry flux coating of 500 to 1500micrograms per square inch is recommended as a starting point. When Nitrogen sealed wave solder equipment is used, it is generally necessary to apply slightly more flux than normal as a result of excess drying due to the extended length of the equipment. When Foaming, air stones should be supplied with compressed air, free of oil and moisture. Adjust foam headto achieve uniform bubble size for optimum coverage. During foaming applications, it is periodically necessary toadd AIM’s Common Flux Thinner to replace that which islost due through evaporation. Monitoring and controlling the acid number is recommended for maintaining the flux composition. The acid number shouldbe maintained between 18.9 –19. 9MG KOH/GRAM.
    Dick Smith
    in Australia
    $12.00
    $0.00 P&P
    $12.00 Total Price
  • ACTI NVR ENR-020P 9CH 8POE INBUILT PLUG N PLAY Image
    Highlights ACTI NVR ENR-020P 9CH 8POE INBUILT PLUG N PLAY Weight: 1.0kg
    Dick Smith
    in Australia
    $572.00
    $0.00 P&P
    $572.00 Total Price
Sign Up

5.2.0.1872